Home
Helmets
Jackets
Pants
Boots
Gloves
Leathers
Brakes
Tires
Rims
Frames
Engines
Batteries
Lights
Oils
Exhausts
Chains
Fairings
Electrics
Chemicals
Suspensions
Transmissions
Magazines
Manuals
Motorcycle Buys
Motorcycle History
Motorcycle Tours
Gear Auctions
Directory

XML RSS

Motorcycle Helmet Reviews

Quality Motorcycle Helmets,
the Safest Place for your Brain!


How to Review Motorcycle Helmets?

The most important piece of motorcycle gear is a motorcycle helmet. Quality bike helmets can increase your motorcycle experience without being a drag.

This motorcycle Helmet Guide shows you how to select a quality helmet plus you will find links to motorcycle apparel discounts, motorcycle helmet brands & motorcycle directories.

10% Discount on All Motorcycle Helmets
Enter coupon code: 10DISCOUNT at checkout.






Motorcycle Helmet Introduction


Of course each type of helmet has it's benefits and disadvantages. Every group of riders have their certain love for a type of helmet. It also has to do with the bike you ride and the type of person you are.

full-face helmets

Full face helmets

Easy to recognize because of their protection around the chin. This kind of helmet construction gives it extra strength. However they can easily get warm and foggy.




hybrid helmets
Hybrid helmets
allow you to open the chin part of the helmet and slide it upwards. Often very useful for people with glasses.






open face helmetsOpen face helmets
Open faced is also known as a three quarter motorcycle helmets. They are aimed to protect the ears and the side of the face. However this kind of helmet doesn't have any chin protection. Visors are often detachable.





shorty helmetsShorty helmets also known as half helmets and are the simplest form of a helmet. There is no side and chin protection. They look best when riding a cruiser or custom bike.






motorcross helmet
Motor Cross helmets
include a dirt cap and possibilities to place goggles.


















Helmet Advice & Checks


Comfort
Apart from the safety factor the most important aspect of a helmet is comfort. Let's face it, you're going to be wearing it time and time again. It should be safe, look good and feel very comfy.


Helmet shell
The shell is usually composed of either a polycarbonate mixture (a what ...?) or fiberglas. Fiberglas motorcycle helmets are often high impact resistant, very stable and last a long time. The polycarbonate helmets are often light weight and very sturdy.

The helmet shell should be cast in one piece (which is often the case, ask if you're not sure) because its major roll is to spread the impact and resist a sharp object from penetrating the safety liner.


Helmet safety liner
The safety liner is made of EPS (the same stuff used for white plastic foam cups). It has one roll, absorb the impact energy without passing it on to your head. Some types of helmets are missing this safety liner. This makes for a much cooler looking helmet but it's missing that one ingredient, just so you know (yes I have one too).


Helmet comfort liner
The comfort liner is the padding that rest against your head. It should breath well, be comfortable and also absorb sweat. In some helmets you can take this comfort liner out (for a wash) or replace it with padding which fits better.


Ventilation system
A good ventilation system is very important. Often this does have a direct influence on how noisy helmets get (the wind moving past the vents). But you need ventilation (unless you like riding with a fogged up visor).

Check out if your ventilation system can be opened and closed and if there are openings in the back of the helmet (air coming in should be able to leave the helmet).


Chin strap locking systems
There are three types of systems: double D-ring (the most safe and lightest), quick release (most used and easiest to handle) and lever system (not used a lot and most prone to damage).

I have stood there trying to open that s.. chin strap after a days ride but couldn't. Man do you look silly. Ideally you will get use to the chinstrap of your helmet and can open and close it without any problems.

closers of motorcycle helmets


(1) - quick release with strap shifter (2) - quick release with press button (3) - quick release with press button ton the side (4) - saw-tooth connection (5) double d-ring connection (6) - soft inner padding (7) - velcro connection for left-over strap.


Space for your ears / (sun)glasses
The inside of the helmet should have enough room for your ears. Ergonomically formed linings are so much more comfortable. With every hour you wear your helmet it becomes better vs. a cramped motorcycle helmet were it becomes worse. Every motorcycle helmet will adapt a little to your head size (but this is only a little).


Sunshades

A low hanging sun can blind you to the extreme. Some helmets have a nice sunshade built into them, very useful. However a pair of sunglasses does the same trick, you choose.


Helmet weight
Unless motorcycle helmets are from the stone ages, weight is not a consideration to worry about. If it's a bite heavier than your old one no problem. Within a short time your muscles will get use to it.


Helmet shell sizes
Some brands do not change their shell size, they only change their inner liners. This means that an extra small helmet size has a lot of extra padding on the inside, compared to an extra large version. Considering that you want helmets that don't feel very big on your head, check if the helmet brand uses different shell sizes for each model size. (this kind of motorcycle helmet will be more expensive).


Visors

Does your helmet have a visor? If not you'll be wearing shades or goggles. Very important is that the visor doesn't influence your vision (optically incorrect).

Check out which kind of visor your motorcycle helmet uses. Can you get different kinds e.g. different shades. How easy is it to remove a visor. Where and how does it click open and close. Make sure you feel comfortable with how stable it feels. Does it make a good seal with your helmet.

You can also get a liquid called - Novus polish cleaner & scratch remover - This stuff is great for removing scratches from your visor but also from your windshield.








Useful Helmet Tips


When trying on a motorcycle helmet wear it at least 5 minutes and then take it off. Concentrate on places which start to bother you. If possible look in a mirror after to see if you have any red marks on your face.

Try to avoid placing your helmet to high off the ground. So often have I seen a helmet go crashing to the ground because they were left hanging on the mirror, placed on the saddle or on top of a wall. A simple fall can bust your expensive motorcycle helmet and that's just a shame.

Always make sure you realize with what helmet safety standard you are riding. So you also know that if it doesn't meet the norm your insurance company might give you a hard time. Just so you know...

Check if your selected helmet has anti-scratch and a good anti-fog treatment. Also look to see that the visor doesn't touch against the helmet outer shell. This will result in scratches and unclear area on your visor.

A lighter helmet will of course always be more comfortable than a heavier version.

Give your chinstrap a quick consideration when checking your motorcycle helmet (make sure it's not too long and can be tucked away, so it doesn't keep hitting you on your chin). The strap is often made of nylon (like a seatbelt).

Ventilation systems are a major cause of noisy helmets. The more aero-dynamic the motorcycle helmet (and the vents) the less noise you will have.

The comfort liner adjusts a bite to the form of your head. Generally motorcycle helmets get more comfortable. But always make sure you do start with a very good fit.

Always inquire about the helmet safety standard. Especially cheaper motorcycle helmets try to avoid some safety testing standards.










Helmet Fitting Guide: Get a perfect fit



fitting guide for a helmet
  1. Use a manufactures fitting chart and measuring tape. (1)
  2. Find the corresponding helmet category
    (e.g. Small, Large, Extra Large ...)
  3. Open helmet by pulling chin straps outwards and place over your head. (2)
  4. A helmet should fit tight on your head.
  5. The helmet should feel comfortable.
  6. Check the helmet surrounds your forehead tightly...(3)
    (you cannot put your thumb between your forehead and helmet).
  7. Adjust and close the chinstrap.
  8. Chinstrap may not be pushing against your neck
  9. Shake your head, the helmet itself may not move! (4)
  10. Make sure you can't slide the helmet of your head. (5)
  11. Sit on your motorcycle in a riding position... the top of the helmet may not influence your vision.
  12. To the left and right should be 100% vision
    (but this is required from the manufactures by law)
  13. If you wear glasses make sure to try them on with the helmet. (6)
  14. Full faced masks need at least a finger in front of your chin.
  15. Press down on the top of the helmet (hold it their)... make sure it feels comfy and surrounds the whole of your head.
  16. Check for all the features you want / need.
  17. Wear it for at least 5 minutes and check irritation points.(7)
Note: the inner lining will shrink a bite, making the helmet a bite looser.






Popular Motorcycle Helmet Pages

All Motorcycle Helmets Brands
Complete list of all popular motorcycle helmet brands.

Latest Gear Discounts
Quality motorcycle gear being sold at a discount today.











Best Motorcycle Gear - Netherlands
- Europe - All rights reserved - Copyright 2002/06 -